Installing the MultiPro 2000 and Mouse

The MultiPro 2000 is totally plug-and play. There is no need to install drivers. Just follow these steps:  

Using the Remote Mouse:

There are a total of 13 functional buttons - and 3 non-functional buttons. 

Hold the Remote Mouse with your index finger at the trigger button under the Remote, and your thumb on the large mouse cursor control in the center of the top panel.  Always remember to point the front of the Remote at the MultiPro 2000. The Remote will work up to 30 feet from the MultiPro 2000.



If the Remote Mouse does not function, check the following:

Last Update 03-28-01